All Products

The PS-EXT-RO-001 Rounded Extrusion will hold our single width ribbon. The PMMA diffusion blends the light emitted from ProColour ribbon, creating a soft smooth glow.Each 4' length comes with two end caps (one with a hole for wire) and two clips.Additional clips and end caps are available using opti..

Welcome the new XMT-500 tester and controller from Swisson. The Swisson XMT-500 DMX, RDM and Ethernet test and control device builds on the Swisson XMT-120A/350 rugged build quality and adds Ethernet software to its testing abilities! The device remains very portable and it's rugged build quality ..

The Swisson XRC-200 is capable or recording and playing back up to two (2) universes of DMX data. The XRC-200 can be used for single button cue playback, making it an ideal solution for work-lighting sets with complex lighting. It can also be used for pre-programmed lighting effect playback and emer..

The Swisson XWL series Wireless DMX transmitters and receivers are capable of transmitting DMX-512A using LumenRadio’s CRMX without the use of wires up to 500m with the correct installation and line of site conditions. The XWL transmitter can reliably transmit the DMX data wirelessly with a latency ..

Updated Pricing!The true and original Phoenix Contact 2 conductor socket connector is the perfect connector for creating custom fixtures and extensions. The flexibility offered by it's robust screw terminals in unmatched.This is the original Phoenix Contact part number 1757019, no offshore imitation..

24 Our 24Vdc ProColour-24 VW364 variable white colour correct flexible LED ribbon offers outstanding single row LED density. At 364 emitters per meter it offers an almost continuous row of LED emitters for high density applications. Don't let the size of the emitters fool you, this ribbon is sligh..

We offer complete custom LED system design solutions for any product you desire to build. From custom PCB design to 3D CAD work we can make your dreams become a reality.We offer:3D CAD Design and ModellingCustom Electronics and software design3D Printing of PrototypesMetal fabricationand moreOEM Des..

This tape works perfectly to attach our Silicone Diffusers onto smooth surfaces. It is extremely flat and designed to adhere to silicone.Rolls are 60 yards (54.864m) and are long enough to adhere just short off 11 5m lengths of our Silicone Diffuser..

The GST280A12-C6P power supply is a highly reliable 280W power supply with a single 6-pin Molex connector. At 12vDC the power supply provides 21a of DC power through a single 6-pin Molex connector which is ideally mated with the ProSpeed 4-LITE High Speed LED Dimmer.We supply the GST280A12-C6P with ..

The PS-EXT-SQ-001 Square Aluminum Extrusion will fit our single width ribbon. The PMMA diffusion blends the light emitted from ProColour ribbon, creating a soft smooth glow.Each 4' length comes with two end caps (one with a hole for wire) and two clips.Additional end caps and clips can be purchased ..

The Swisson XSW Wireless Transceiver and Opto-Isolator can act as either a LumenRadio CRMX Transmitter or Receiver and is easily configured with the push of a few buttons.In receiver mode the XSW outputs isolated DMX from all 4 DMX OUT ports (**NOTE: DMX THRU port is not active in receiver mode.) Un..