Search

The Swisson XRC-200 is capable or recording and playing back up to two (2) universes of DMX data. The XRC-200 can be used for single button cue playback, making it an ideal solution for work-lighting sets with complex lighting. It can also be used for pre-programmed lighting effect playback and emer..

The Swisson XWL series Wireless DMX transmitters and receivers are capable of transmitting DMX-512A using LumenRadio’s CRMX without the use of wires up to 500m with the correct installation and line of site conditions. The XWL transmitter can reliably transmit the DMX data wirelessly with a latency ..

The Swisson XSW Wireless Transceiver and Opto-Isolator can act as either a LumenRadio CRMX Transmitter or Receiver and is easily configured with the push of a few buttons.In receiver mode the XSW outputs isolated DMX from all 4 DMX OUT ports (**NOTE: DMX THRU port is not active in receiver mode.) Un..

The Swisson XSR Series RDM and DMX Opto-Splitters use optical isolation to completely isolate and boost both DMX and RDM signals. The isolation prevents signal disturbances on separate outputs from affecting other outputs or travelling back through to the input signal connectors.Each isolating devic..

The Swisson XPD-28 Opto-Splitter can split and isolate two (2) separate universes of DMX and RDM data to any of its eight (8) optically isolated outputs. While splitting the DMX and RDM data the XPD-28 also boosts and refreshes the data signals in real-time.The XPD-28 is completely is compatible wit..

The Swisson XND series Ethernet nodes can convert four (4) or eight (8) universes of Ethernet to DMX protocols into DMX depending on the model. Quickly distribute multiple universes of DMX to locations using one Ethernet cable over Art-Net or sACN. Art-Net versions 1 through 4 are supported by the X..