Project SSSHH Incorporated

The Molex Mini-fit Female to Female ProSpeed jumper is used to join 2 ProSpeed 4-LITE dimmers together using their Molex Connectors. These are great if you are using the 7.62mm Phoenix Input to power your ProSpeed and you want to power a second ProSpeed with the same power supply...

This 3 conductor 18awg wire is perfect for making extensions for your LED ribbon or custom fixtures.Specifications:18awg3 conductorsstranded tinned copper 16/30300m (984ft.) per boxJacket colour: greyJacket material: PVCNominal OD: 5.3mm (0.209in.)600V RatingFT4CSA and UL Certifications..

Our 12vDC ProColour ProForm Ultra High CRI dual-flex LED Ribbon allows you to get ProColour's High CRI emitters into tighter spaces on a tighter bending radius. It is available in both Cool White (Daylight) and Warm White (Tungsten) versions.ProFlex may also be known as "snake ribbon", "zig zag ribb..

The ProPix 72 AI RGB LED strip uses APA-102 RGB emitters to give you individual pixel control  of each LED individually. These strips use the hard to find original APA-102 LED emitters which are superior to the APA-102C chips that were built as their cheaper successor.When powered by one or mor..

This 6 conductor 18awg wire is perfect for making extensions for your LED ribbon. We recommend using the additional 18awg conductor as a second +Vdc line.Specifications:18awg6 conductorsfoil shield and drip wire (may be substituted with un-shielded wire based on availability)stranded tinned copper 1..

The ProStick Wx1 LED fixture is available in multiple lengths, with your choice of LED Colour Engine.Our high quality ProStick Wx1 fixtures are built to last, using our high quality ProColour LED ribbon as the light engine. They have fantastic colour rendition and can easily fit into tight p..

Our curved silicone diffuser allows you to pull any of our single width ribbons into it, giving excellent soft and flexible lighting strips. Included with every 5m roll are 6 mounting brackets and two sets of end caps. 10m rolls come with 12 clips and 4 sets of end caps.An inner and outer silicone d..

The moulded XLR-5 to RJ45 adapters come in the following configurations:Male XLR-5 to RJ45RJ45 to Female XLR-5orA pair including one Male XLR-5 to RJ45 adapter and one RJ45 to Female XLR-5 adapterThe moulded one piece 5-pin XLR to RJ45 adapters can quickly and easily convert any CAT-5 or better Ethe..

The ProStick Wx2 LED fixture is available in multiple lengths, with your choice of LED Colour Engine.Our high quality ProStick Wx2 fixtures are built to last, using our high quality ProColour LED ribbon as the light engine. They have fantastic colour rendition and can easily fit into tight p..

The ProSpeed 16 was purpose built from the ground up to allow flicker and banding free shooting at frame rates of 200fps (or higher) on professional rolling shutter digital and film cameras, and it has been a great success. It has even been successfully used on the Phantom camera at over 900fps.We h..

Our Cat5e ethernet patch cables are great for linking together ProSpeed 4-LITE LED Dimmers via the RJ45 DMX ports. Use them in conjunction with the 5-pin XLR to RJ45 adaptors to make DMX cables quickly and cost effectively.These Cat5e cables are durable and backed by a lifetime manufacturers warrant..

Our Phoenix Contact holder firmly holds the connector while you wire it and tighten the screws. No more sore hands from repetitively having to hold and screw Phoenix Contact connectors.They are available in a myriad of colours and quantities of 10 or more can be customized with your logo or message...